Pulse Erbium-Doped Optical Amplifier
Ø Product Description
CSRayzer’s pulse EDFA product has been widely used in the fields of optic fiber sensing , test wind LIDAR, Hydrophone system. This product can keep intact waveform during amplifying the optical signal. The product can be configured in AGC, APC or ACC work mode through GUI .Using the high reliable temperature-controlling technology make the products have excellent thermal performance under wide temperature range.
Ø Product Specification
Parameter | Unit | Min | Type | Max |
Wavelength | nm | 1550.12 | ||
Pulse width | ns | 1 | 100 | 1000 |
Repetition frequency | Hz | 1 | 200K | |
Input average power | dBm | -35 | -10 | |
Output average power | dBm | 0 | ||
Noise Figure | dB | 5.5 | 6 | |
Operation temperature | ℃ | -40 | 50 | |
Storage temperature | ℃ | -40 | 85 | |
Supply voltage | V | 4.75 | 5 | 5.25 |
Power consumption | W | 12 | ||
Pigtail Length | cm | 100±2 | ||
Pigtail type | LC/UPC, 900um | |||
Ø Product Feature
1) Keep the intact waveform
2) AGC/APC/ACC operation mode
3) Low noise figure and power consumption
4) High stability and reliability
5) Customizable
Ø Main Application
1) Optical fiber sensing
2) Test wind LIDAR
3) Hydrophone system
4) College and research institute
²